The following are the new features for the versions released so far:

1.19, 1.18.2, 1.18.1, 1.18, 1.17.1, 1.17, 1.16.1, 1.16, 1.15.1, 1.15, 1.14.3, 1.14.2, 1.14.1, 1.14, 1.13, 1.12, 1.11.2, 1.11.1, 1.11, 1.10, 1.9, 1.8, 1.7, 1.6, 1.5, 1.4, 1.3, 1.2, 1.1, 1.0.

1.19 - September 2026

Basic software

▪The new VertiGIS Studio Web version 5.43 with its new features serves as the basis.

▪The new Attribute Form Designer version 1.13 with its new features as an additional component.

Station Entry

▪Added a new Station Entry panel for automatically guiding multiple lines into a station.

▪Added a new option to route lines parallel into the station.

▪Added a new option that allows automatic creation of connection points.

▪Added a new option to adjust the gap size and split or shorten lines automatically.

Rotate Point

▪Added a new tool for rotating a point based on its symbol rotation.

▪Added a new option to adjust the rotation in 90 degree increments.

▪Added a new option to align the rotation perpendicular or parallel to an existing feature.

Annotations

▪Added a new option to batch delete a block annotation.

▪Added a new option to change the annotation class when creating block annotations.

▪Added a new option to remove features from the list when creating block annotations.

▪Added support for aligning annotations along polygon edges.

Create Features

▪Added a new option to automatically create the next feature.

▪Added a new option to retain the same attributes or copy attributes from another feature when creating the next feature.

▪Visual variables are now respected when creating features.

Copy/Paste Features

▪Utility Network snapping rules are now respected when copying features.

Dimensions

▪Added a new option to copy dimension features to another dimension layer.

▪Added support for displaying linear dimensions.

▪Added new options to show or hide dimension text, symbols, and dimension lines.

▪Added a new option to display ordinate dimension text orthogonally.

Multilines

▪Added support for creating bounding structures during multiline creation.

▪Added an Empty Line option for more flexible multiline positioning.

▪Added a new option to predefine gap sizes and other visual measurements for the entire application.

Job Management (Early Access)

▪Changed the module status from Preview to Early Access.

▪Added full support for registering and maintaining job groups as Portal Groups.

▪Added All to Default and All to Branch options for batch conflict resolution.

▪Added a new option to configure worker privileges in the App Designer.

▪Added pagination and support for managing large numbers of jobs.

▪Supervisors and administrators can now create jobs.

▪General stability, bug fixes, and UI improvements.

Relationships

▪Added a new option to set a related feature as the active feature.

▪Added a new option to filter out system relationships, such as relationships for external documents and annotations.

Result List

▪Bulk Attribute Form editing is now available in Networks Editor.

Subnetworks

▪Added support for creating subnetworks.

▪Added support for adding subnetwork controllers.

▪Added support for disabling subnetwork controllers.

▪Added support for deleting subnetworks.

Localization

▪Networks Editor is now available in Danish.

Bug Fixes

▪To view bug fixes and improvements, visit our change-log.

1.18.2 - August 2026

Bug Fixes

▪Resolved an issue that prevented External Documents from being used due to MIME type validation errors.

1.18.1 - July 2026

Bug Fixes

▪Resolved an issue that prevented event listeners or workflows from being added to a solution in Web Designer.

1.18 - July 2026

Basic software

▪The new VertiGIS Studio Web version 5.42 with its new features serves as the basis.

▪The new Attribute Form Designer version 1.12 with its new features as an additional component.

Loop-In Features

▪Added a new option to find nearby lines and automatically connect network points to them.

▪Added a new option to manually loop in points.

▪Added a new preview functionality to show new line geometry.

▪Added new options for setting buffers and gap sizes for looping.

Replace Geometry

▪Added a new tool to replace the geometric extent of a line.

▪Added a new option to replace the geometry by sketching.

▪Added a new option to replace the geometry based on another existing feature.

Annotations

▪Added a new option to move or rotate block annotations as a block.

▪Added a new option to edit existing block annotations.

Copy/Paste Features

▪Added a new option to copy and paste with an Anchor Point and basic snapping.

▪Improved UI for group copy selection.

▪Improved performance for copying associations.

Shared Templates

▪Added a new option to show attribute masks for single lines.

Split/Merge Features

▪Added a new option in Split Features to interact with the split selection for Split by Line.

Multilines

▪Added a new functionality to shorten trench and multilines with an area.

▪Added a new option to show attribute masks for single lines.

▪Added a new option to create protective tubing with a 90 degree angle.

Job Management

▪Added a new option in Groups to find portal groups for administration.

▪Added a new option to show to which group a job belongs.

Bug Fixes

▪To view bug fixes and improvements, visit our change-log.

1.17.1 - May 2026

Bug Fixes

Dimensions

▪Resolved an issue that prevented dimension text from being visible.

Job Management

▪Resolved an issue that displayed an incorrect authentication message while loading the app.

1.17 - May 2026

Basic software

▪The new VertiGIS Studio Web version 5.41.2 with its new features serves as the basis.

▪The new Attribute Form Designer version 1.11.1 with its new features as an additional component.

▪Added support for feet as an imperial unit for all measurement based tools.

▪Added support of Java Script API 5.0 which allows you to set symbology ranges (reference scale based symbology) to subtype group layers.

▪Added a new shortcut in result list to show attachments.

Copy/Paste Features

▪Added a new option to copy and paste a selection of assets.

▪Added a new option to copy and paste annotations and their assets.

▪Added a new option to copy and paste associations and their assets.

Annotations

▪Added support of relationship rules to configure which annotation subtype should be used for which feature.

Dimensions

▪Unified measurement units across display and editing according to your settings.

▪Dimension text now honors arcade expressions defined in styles, enabling suffix and prefix rendering when included in the expression.

Preset/Group Templates

▪Added support for annotations in preset templates.

Split/Merge Features

▪Added a new option that supports the splitting of lines with linked annotations.

▪Added a new option that supports the merge of lines with linked annotations.

Multilines

▪Added a new toggle to show layer details of multiline template.

▪Improved the segmentation feature for creating trenches.

Documents

▪Added a new option to set the document parameters in the Designer app.

▪Improved security by adding a MIME Type check of documents for open, download and preview.

Layers

▪Added a new option to add temporary layers by URL.

Job Management

▪Added a new option to enable Job History during the installation of Job Management.

▪Added a new option to log creation, assignment changes, deletion and editing of a job in Job History.

▪Added a new option to view or disable Job History.

▪Added a new option to delete an edit version when a job is posted.

▪Added a new option to automatically change the version owner when reassigning a job to a new worker.

DXF Export

▪Added a new option to enable selecting a target coordinate system if the export should not be created in the spatial reference of the current map.

Localization

▪Networks Editor is now available in Portugese.

Bug Fixes

▪To view bug fixes and improvements, visit our change-log.

1.16.1 - April 2026

Released important bug fixes in the Networks Editor.

DXF Export

▪Resolved multiple issues affecting DXF export functionality improving reliability and output consistency.

Annotations

▪Resolved multiple issues affecting rendering and rotation of annotations.

▪Fixed an issue where initial previews for annotations were not displayed.

▪Fixed an issue where newly created annotations could not be selected.

Job Management

▪Fixed an issue where job creation failed if the web map contained layers or web services from a different URL.

▪Fixed an issue preventing job creation when feature services without version management capability were present in the web map.

1.16 - March 2026

Basic software

▪The new VertiGIS Studio Web version 5.40 with its new features serves as the basis.

▪The new DXF Export version 1.4 with its new features as an additional component.

▪The new Attribute Form Designer version 1.10 with its new features as an additional component.

▪The DXF Import is now available in Networks Editor.

Attachments

▪Added a new option to add the link to external attachments.

▪Added a new option to preview, open and download external attachments.

▪Added a new option to remove the link to external attachments.

Annotations

▪Added a new option to create block annotations with leaderlines.

▪Added a new option to change the subtype of an existing annotation while editing.

Dimensions

▪Improved UX to create orthogonal dimensions in edge extensions.

▪Added a new option that allows you to apply a double-underline dimension style to end dimensions automatically.

Preset/Group Templates

▪Added support for dimensions in preset templates.

▪Added support for rotations of point symbology in preset templates.

▪Added a new option to set the data source for editing templates globally in web designer.

▪Added support for primary point feature snapping in linear group templates.

Multilines

▪Added a new option in trench management to set structure lines on top of UN lines.

▪Improved the multilines tool so it respects the setting for the data sources of editing templates.

Job Management (Preview)

▪Added a new option to use job management if more than one feature service is available.

▪Added a new option to delete all versions if a job is posted.

▪Improved Conflict Resolution by adding support for Esri coded domains.

▪Fixed the issue with Conflict Resolution in ArcGIS Enterprise 11.3.

Localization

▪Networks Editor is now available in Dutch.

Bug Fixes

▪To view bug fixes and improvements, visit our change-log.

1.15.1 - 3 February 2026

Improved the performance of the Networks Editor Solution when zooming and panning in the app.

1.15 - January 2026

Basic software

▪The new VertiGIS Studio Web version 5.39 with its new features serves as the basis.

▪The new DXF Export version 1.3 with its new features as an additional component.

▪The new Attribute Form Designer version 1.9 with its new features as an additional component.

Documents

▪Added a new Document Management Service for configuring connections to external document shares.

▪Added a new option to enable access to externally stored documents.

▪Added a new panel for managing external documents.

Annotations

▪Added a new functionality Block Annotation that lets you create multiple annotations for parallel lines.

▪Added a new option to create annotations with leaderlines.

Cross Sections

▪Added a new option to create cover stones over cross sections.

▪Added a new option to change the display symbol for pipes, cables and tubes.

▪Added a new option to change the colors of cross section elements.

▪Added full support for non-spatial cross section objects.

Dimensions

▪Added support to create line extension dimensions.

▪Added a new option to that allows to add custom lengths during the creation of a new dimension.

Preset/Group Templates

▪Added support for non-spatial objects.

▪Improved retrieval performance for group and preset templates.

▪Networks Editor now prevents writing empty strings to null-able numeric fields in preset templates, to avoid server errors during feature edits.

Relationships

▪Added a new option in result list to show the relationships of a selected feature.

▪Added a new option to set relationships from selected features.

▪Added a new option to set relationships from selected non-spatial features.

Job Management (Preview)

▪Improved the role descriptions of workers and supervisors.

▪Added a new option for admins to add or remove a user from job management.

▪Added a new option to Conflict Resolution where you can zoom to a conflict while resolving.

▪Added a new functionality to Conflict Resolution where it displays values from the Esri domain.

▪Added a new functionality to Conflict Resolution where it supports conflicts of annotations and dimensions.

Attachments

▪Added a new option to display external documents if connected to an existing feature.

Bug Fixes

▪To view bug fixes and improvements, visit our change-log.

1.14.3 - 15 December 2025

Released an important bug fix in the Networks Editor.

Bug Fixes

•Fixed an issue where Job Management is only applicable if Server and Portal URL are identical.

1.14.2 - 10 December 2025

Released an important bug fix for the version component in the Networks Editor.

Bug Fixes

•Fixed an issue that prevented opening or creating versions when using a non-versioned feature service in the web map.

1.14.1 - 24 November 2025

Released two important bug fixes in the Networks Editor.

Bug Fixes

•Fixed an issue that Update Subnetwork does not work for some queries.

•Fixed an issue that prevented localization during update with Solution Manager.

1.14 - November 2025

Basic software

▪The new VertiGIS Studio Web version 5.38 with its new features serves as the basis.

▪The new DXF Export version 1.2 with its new features as an additional component.

▪KML import is now available in Networks Editor.

▪The Bulk-Attribute Update feature is now available in Networks Editor.

Job Management (Preview)

▪Manage jobs, users, user rights, and groups in one centralized toolbar.

▪As a Supervisor, create and assign new jobs, and approve finished jobs.

▪As a Worker, open and close assigned jobs.

▪Resolve conflicts arising from overlapping job tasks or edits.

▪Reconcile and post jobs to affect changes to the default version.

Annotations

▪Added a new option to display and edit annotations with leaderlines.

▪Added a new option to delete annotations.

▪Added a new option to automatically delete feature-linked annotations if the linked feature is deleted.

Feature Templates

▪Added a new functionality to read feature templates from the shared templates endpoint as an alternative to reading them from the web map.

▪Added a new option to create non-spatial features.

Preset/Group Templates

▪Added line tool support for point-based group templates.

Multilines

▪Added a new option to extend multilines.

▪Added a new functionality to forbid a 0.0 gap between two lines.

▪Added a new option to define the gap between an axis and a multiline.

Dimensions

▪Added a new option to add a label to an orthogonal start point.

▪Added support to display double underlined dimensions.

Manage Versions

▪Added a new option to show and work with versions of multiple data sources.

▪Improved the undo/redo, save, and discard of edits of different versioned services.

Georeferencing

▪Added a new option to save georeferenced images as media layers to the ArcGIS portal.

▪Added a new option to display and load shared georeferenced images from other users.

Network Diagrams

▪The Networks Diagrams module is now available in Networks Editor.

▪Added a new option to zoom or pan to a diagram in the diagram panel.

DXF Export

▪Added a new functionality to set a polygon as an area to export DXFs from.

▪Added the export logs to the downloaded .zip file.

Licensing

▪The license invalidity warning message now pops up every ten minute interval.

Attribute Form 1.8

▪Added general bugfixes.

▪Added a new product Attribute Form Designer 1.8 to create, edit, generate and manage attribute forms.

Localization

▪Networks Editor is now available in Swedish.

Bug Fixes

To view bug fixes and improvements, visit our change-log.

1.13 - September 2025

Basic software

▪The new VertiGIS Studio Web version 5.37 with its new features serves as the basis.

▪The new DXF Export version 1.1 with its new features as an additional component.

▪Added support of Right to Left (RTL) languages.

▪Added a new option to remove custom layers from the map in the table of contents.

Annotations

▪Added a new option to create feature-linked annotations.

▪Added a new functionality in Feature-linked annotations to follow course of line segment.

▪Added a new option to edit the geometry and the text of free annotations.

▪Added a new option to edit the geometry of feature-linked annotations.

Edit

▪Added a new functionality to create features based on shared Preset Templates.

▪Added a new functionality to create features based on shared Group Templates.

Licensing

▪Products are now licensed and users will receive a warning message if no valid license is detected.

Multilines

▪Added a new functionality to show the hierarchy of lines during creation.

▪Added a new functionality to deal with connected net points and split line during change course.

▪Added a new functionality to create multilines for simple (non-Utility Network) features.

Georeferencing

▪Added a new option to use the Adjust Roughly functionality to adjust raster layers before creating pass points.

 

Trace

▪Improved usability for inconsistent traces by adding an option to disable consistency check.

▪Trace configurations are now shown based on their shared configuration in the web map.

Attribute Form

▪Improved pop-up configuration support.

▪Improved map-service compatibility.

1.12 - July 2025

Basic software

▪The new VertiGIS Studio Web version 5.36 with its new features serves as the basis.

▪Added support for ArcGIS Enterprise 11.5.

▪Added support for working with Maps that contain Map Image Layers, and for Feature Layers that reference Map Service data.

Georeference

▪You can now align raster data to real-world coordinates using pass points.

DXF Export

▪Added a new feature to export layer data to dxf file format with different selection and export options.

▪Added a new feature to show the DXF Export logs.

Edit

▪Added a new functionality to step-wise undo editing operations within the current version.

▪Added a new functionality to step-wise redo editing operations within the current version.

Manage Versions

▪Added a new functionality that prevents users from closing versions with unsaved edits.

Multilines

▪Added a new functionality to create routes for specific segments of a line feature.

▪Added a new functionality to change the reference line when changing the course line.

▪Improved Drag and Drop for Multiline feature hierarchy.

User Interface

▪Improved usability by changing the positions of tools in the toolbar.

Attribute Form

▪Added a new option to read pop-up configuration from a web map when no attribute form configuration is defined.

▪Groups can now be displayed as horizontal tabs in the attribute form, alongside the existing option for vertical collapsible groups.

1.11.2 - 16 June 2025

Bug fix

•Fixed an issue with the Attribute Form when exactly one feature is identified. [329783]

•Fixed an issue in the Attribute Form when creating features in Microsoft SQL Server. [330364]

1.11.1 - 4 June 2025

Released an important bug fix for the trace component in the Networks Editor.

Bug fix

•Fixed an issue that prevented trace flags from being defined on Network Features when Map Service layers were visible in the target area. [329396]

1.11 - May 2025

Basic software

▪The new VertiGIS Studio Web version 5.35 with its new features serves as the basis.

Annotations

▪Added option to create a new annotation with fix point.

▪Added option to create a new annotation with baseline.

Merge Tool

▪You can now merge attributes according to a merge policy.

Dimensions

▪You can now Include Dimension Layers directly onto the web map.

▪You can now edit and delete orthogonal dimension groups.

Multilines

▪Added option to create multilines with trench hierarchy.

▪Added option to configure multiline parameters, such as buffer size.

▪UI improvements when changing the course of multilines.

Localization

▪Networks Editor is now available in Italian.

Split Lines/Areas

▪Split for Areas is now enabled.

▪UI improvements in Split Lines/Areas.

▪Added option to handle Cross Sections if Structure Lines are split.

▪Added option to handle Relations when splitting a feature.

▪Added option to handle Associations and Terminal Configuration while splitting a feature.

Relationships

▪Added option to show the Relationship Configuration.

Edit

▪Added a Refresh button to reload the map contents.

▪You can now explicitly save and discard edits when editing in versions.

▪Added a new functionality to lock and release locks when opening a version.

Trace

▪Trace is now available in Networks Editor.

Attribute Form

▪Added a new option to reference catalogs with different column names.

▪Added French and Italian localizations.

▪Improved the display of dates.

▪Added a new option to save catalogs as separate portal items.

1.10 - March2025

Basic software

▪The new VertiGIS Studio Web version 5.34 with its new features serves as the basis.

Merge Tool

▪Added a new option to merge two line or polygonal features.

▪Added a new option for interpolation of features which are not 100%geometrically coincident.

▪Consideration of existing Attachments, Cross Sections, and Relationships in case of merging.

Annotations

▪Added a new option to view annotation layers, provided they are already a part of the web map.

Multilines

▪Improvements done to the replacing algorithm for editing Multilines.

Cross Sections

▪Added a new option to re-draw the anchor line of a Cross Section.

▪The color of the Cross Section labels are now based on symbology.

Dimensions

▪Added a new option to create orthogonal dimensions via the keyboard Enter key.

▪Improved the editing of orthogonal dimensions.

▪Persist creation options in User Preferences.

Split Lines

▪Attachments are now copied to the resulting Split Lines.

Attribute Form

▪Improved formatting for numbers.

▪Added a new option to sort coded values.

1.9- January 2025

Basic software

▪The new VertiGIS Studio Web version 5.33 with its new features serves as the basis.

Cross-section

▪Added a new option to edit the grid arrangement of a cross-section.

▪Added a new option to change the grid size of a cross-section.

▪Added a new option to show and flip the viewing direction of across-section on the map.

Dimensions

▪Added a new option to edit and delete dimensions.

▪Added a new option to edit and move dimension labels.

▪Added a new option to create aligned dimensions.

Multilines

▪Initial gap is now saved in User Preferences.

▪Added create routes for multilines.

Topological Editing

▪Edit geometry with and without editing the topologically connected features.

1.8 - November 2024

Basic software

▪The new VertiGIS Studio Web version 5.32 with its new features serves as the basis.

Cross-section

▪Added a new option to save and edit cross-sections representation on the map.

▪Added a new option to delete all cross-sections of an asset.

Dimensions

▪Added a new option to create line dimensions.

▪Added a new option to create orthogonal dimensions.

Relationships

▪Added a new option to show the relationship between multiple assets.

Attachments

▪Added a new option to show, add, and remove the attached photos and documents to assets.

Attribute Forms

▪Added support for using catalogs. Extended developer documentation is now available to the administrator for customizing these attribute forms.

Localization

▪Networks Editor is now available in the French language.

1.7 - July 2024

Basic software

▪The new VertiGIS Studio Web Version 5.31 with its new features serves as the basis.

Cross-section

▪A new option to draw cross-sections on the map is added.

Draw

▪The Snapping toolbar also switches snapping On/Off for Markup and Measure.

Validate Topology

▪Automatic repair of incorrect Terminal connections.

1.6 - July 2024

Basic software

▪The new VertiGIS Studio Web Version 5.30 with its new features serves as the basis.

Cross-section

▪A new component to display the cross-section of a trench content is added.

Snapping

▪A new Snapping toolbar on the map is added to control the active snapping options while sketching.

Multilines

▪Improved usability for placing the axis when creating Multilines.

▪The axis symbology can now be defined in Multilines tool.

▪Automatic geometric connection of lines when continuing Multilines.

Terminals

▪Support of Terminal connections that are defined by a connectivity association.

Subnetworks

▪The Subnetwork panel can now handle a very large number of subnetworks through paging.

Validate Topology

▪Improved display of Validation errors in the error list.

1.5 - April 2024

Basic software

▪The new VertiGIS Studio Web Version 5.29 with its new features serves as the basis.

Subnetworks

▪For quick identification, the subnetworks in the results list are now also displayed with their graphical characteristics.

Associations

▪The display and highlighting of assets on the map has been optimized.

Terminals

▪User guidance and interoperability improved.

▪Newly created lines are now automatically connected to the appropriate terminals if the line end points are geometrically connected to network points for which terminals are defined.

▪If a newly created line cannot be clearly connected to a terminal, the terminal dialog is displayed. The user can manually connect the line to the desired terminal.

Compatible Feature Templates

▪The rules for edge-node-edgeare now also evaluated for the compatible feature templates.

Toolbar

▪For quick access to the important Edit attributes and Edit geometry functions, these are now also available in the toolbar - independently of other functions.

Network topology
There are now three modes available for carrying out the topology validation:

▪Standard Perform a standard validation.

▪Rebuild Rebuild and repair inconsistencies in the network index.

▪Force rebuild Rebuild and repair inconsistencies in the network index.

Change multiple lines

▪The course of multilines can now also be changed in sections and bundled.

Attribute Forms

▪The use of the Configurable attribute forms has been further developed. Extended developer documentationis available to the administrator for customizing these attribute forms.

1.4 - January 2024

User Guidance

▪In the quick access functions area, you can now switch to the previous or next map view with the corresponding zoom level.

▪Optimized user guidance for the construction and associations functions.

Documentation in the new layout
New VertiGIS layout for Networks documentation with improved scaling options for low space requirements. This means that the documentation is also ideal for use on small monitors.

Construction Tools

▪Optimized User Guidance

▪Changing an existing baseline direction can now be carried out using a new function in the action menu.

Snapping
Catching is now also possible on edges.

Create Multilines

▪Construction and storage of multiple, parallel lines using an existing line feature or a sketched line

▪View settings, e.g. distance between lines, alignment, preview, can be changed.

Update Subnetworks
Updating subnetworks to ensure that any changed assets, attributes, network features or connectivity in a network are current and valid.

Connecting Terminals
Logical, network-compliant connection of line objects with devices(components) and node objects via their terminals.

Edit Associations

▪Optimized User Guidance

▪Display of associations now also available in the context menu of asset results.

Manage Versions

▪Display of the current version in the status bar.

▪Under certain conditions, the ownership of a version can be transferred.

Survey Points

▪Easier file selection using drag & drop for selecting and uploading files in the import dialog

▪Configuration of the dialogs for the layer settings possible

Please note the information in Known Issues, as it is currently not advisable to edit data where the Z values have been explicitly recorded.

1.3 - November 2023

Geometry and Attributes of a feature

▪The geometry of a feature can now be edited.

▪The attributes of a feature can also be displayed and edited in a new attribute form.

▪These attributes can be changed using configurable attribute forms . Developer documentationis available for the administrator to customize these attribute forms.

Associations

▪The display of associations has been extended with the possibility of editingassociations.

▪New associations can now be created.

▪A configurable context menu can be used to store typical, recurring actions that can be executed on the selected network feature.

▪The associations of an associated network feature can also be displayed.

▪Improvement of the user guidance

VERSION MANAGEMENT

▪The filtering options have been extended with regard to owner and access authorization.

▪Improvement of the user guidance

Split Lines
When placing a net point on a line, the system now automaticallychecks whether the rules of the utility network specify a split of the line. If this is the case,the line is automatically disconnected.

Survey data
Bug fixes have been made.

Performance
Improve the loading speed when launching the application.

In parallel, bug fixing was done on all existing functionalities.

1.2 - July 2023

Split Lines
With the new Splitfunction in the Edit tool group, network features can be split using a point or one or more network feature(s) can be split using an intersection line. When splitting lines, the domain guidelines for splitting lines are taken into account.

Show Associations
This function can be used to show the associations between network features that are non-spatial and non-coincident objects on the map. A utility network can have the following types of associations:

▪Connectivity Associations

▪Containment Associations

▪Structural Attachment Associations

For more information, see Esri's ArcGIS Pro Help.

Query Builder
Through this VertiGIS Studio query tool, queries can be executed on a layer according to specific characteristics using search and filter functions. More information can be found in the VertiGIS Studio Web documentation in chapter What's newabout the Query Tool.

Language Setting
In the user settings in the status bar, the display language of the application can be selected between English and German.

Deleting Features
It is now possible to delete multiple features from the results list at once.

Version Management
The readability of the version names has been optimized.

Network Validation
The interface of the network validation function has been optimized.

Create Feature
Feature templates of invisible layers are no longer displayed.

In parallel, bug fixing was done on all existing functionalities.

1.1 - March 2023

Subtype Group Layer (composite feature layer)
Performance improvement, since actions (such as panning, zooming,otherwise re displaying) can be performed on groups of layers rather than on individual layers.
Further information on Subtype group layers can be found in the Esri ArcGIS Pro Help.

Compatible Feature Templates
When creating new features, only the feature templates that can be linked to the desired object from a network topology perspective can be offered with this mode.

Version Management
The creation of an Esri Branch version is now possible. This enables parallel processing of the same database by different users.

Redesign of the network validation
The network topology validation feature has been revised.

1.0 - January 2023

Release 1.0 is the initial version of the Networks Editor.

The following functions are included in this version for Creating and Editing the network infrastructure on the basis of the ArcGIS Utility Network.

•Attribute Data and Geometries
Edit attribute data and geometries in a topologically correct and rule-compliant manner

•Network Data
Edit existing data in the Utilities network

•Non-network Data
e.g.edit construction points and lines, work spaces of non-network data that are part of the utility solution

•Validation
Validation mechanisms for dirty areas to generate a correct database

•Querying Data
Identify and display asset attribute information

•Survey point import
Add externally collected measuring point files (CSV)

•Construction
Construct auxiliary points for creating features

•Measure

•Print

•Redlining
Drawings and notes in maps

•Export
Export results from tables and lists (e.g. Excel, Shape file)

•Share
Share project via link